Which film gives the finest of grains?

Frames exposed at about ISO 100 will have finer grain, but frames on the same roll of film can be exposed at speeds as high as ISO 800 and still produce printable negatives. This differs from conventional films, which require you to expose the whole roll at a single film speed..

Is black and white film sharper?

Of the two images above, the black and white photo looks sharper, but the truth is they’re the same exact image.

Why are my film photos not sharp?

The most common reasons that lead to unsharp film photos are motion blur, caused by using too slow a shutter speed; missed focus, caused by not having enough depth of field to work with; and underexposure, caused by not exposing for the shadows.

Is Ilford film good?

Ilford FP4 Plus is a good all-purpose film that performs best in good lighting conditions. The original FP4 was launched in the 1960s, so it has definitely stood the test of time. It has since been updated in the 90s to the new and improved FP4 Plus.

How do you make a black and white picture sharp?

6 Tips for Shooting Black and White Photography

1. Look for images that provide high contrast.
2. Use texture as another way to express contrast.
3. Monitor light sources in street photography.
4. Use a small aperture and as low an ISO as possible.
5. Use the rule of thirds.
6. Check your camera’s histograms.

Can you use Kodak film in Ilford camera?

I also don’t recommend using professional color-negative film stocks like Kodak Portra, Kodak TMax, or Ilford Delta films. While those films will create perfectly exposed images in this camera, you won’t be able to take advantage of the sharpness, color, and exposure flexibility that professionals pay extra for.

How do you get high contrast in black and white?

When choosing images to edit in a high contrast black and white style, look for images with lots of contrast. You want really bright areas and really dark areas. Pay attention to your use of light. Strong directional light, patches of hard light, rim light, and backlight give you bright brights and dark shadows.

Is it better to shoot in black and white or convert?

It is almost always better to convert to black and white in post, because you have much more control over the process. If you use the in-camera conversion, you get it the way it converts. If you shoot in color, then you have many different ways in post to convert the image.

Is Kodak film still made? Yes! 35mm is still made and is by far the most popular film format that we sell. 35mm is still made by a few of the big dogs in film such as Kodak, Ilford and Fujifilm as well as lots of lovely indie brands such as Film Washi, Dubblefilm and revolog.

Why is my black and white film so grainy?

Underexposing and over-developing both accentuate film grain. Of course, the same is basically true of digital: the darker the overall image / exposure, and the more you lift the shadows in post, the noisier it will be.

Can you still buy Ilford film?

The Ilford film brand is owned by Harman Technology – who also own Kentmere – and they are continuing the legacy so you can still buy Ilford 35mm film, 120 and large format with a great choice of different emulsions.

Should I disable film grain?

Properly implemented film grain should eliminate posterization/banding in games. Noise is far more natural looking and should be less distracting – particularly in motion.

Does stand development increase grain?

However these Tri-X negs stand processed in dilute Rodinal are grainier than usual. In this case it presents some evidence that the increased acutance enhanced by decreasing agitation can also increase grain.

Is Ilford HP5 good?

ILFORD HP5 Plus 400 – Film Review. HP5 is one of the oldest running film stocks and has a very classic look. It has beautiful subtle tones and medium contrast that produces great detail in the shadows. It has incredible exposure latitude and pushes very well.

Is Kentmere film good? Kentmere 400 is a high speed Panchromatic black & white film suitable for a wide variety of photography. It has mild contrast, subtle tones, and very good exposure latitude. Due to its affordability and broad exposure latitude it is an ideal film stock for beginners.

Does film grain effect performance? it gives better performance because it’s not just a filter over the entire screen-space its actually a calculated shader put over the screen-space, and it has to be to be honest otherwise it would make certain textures and scenes look like the static on an old tv with no cable hooked up.

Do games look better with or without film grain? It’s visual tinnitus. Even in games where film grain is thematically justified—as with Left 4 Dead’s attempt to reference grimy B-movie zombie flicks—turning it off makes everything look instantly better, and much easier on the eye.

Why are my black and white film photos grainy?

Underexposing your film will increase the amount of noticeable grain on any film stock, especially in the shadows of the image. That’s because very little light hit the light-sensitive silver crystals, so the smaller unexposed crystals wash off the film in processing while the bigger crystals remain.

How do you reduce grain when developing film?

There are three main ways to reduce the appearance of grain when pushing films, each with their own benefits and drawbacks.

1. Overdevelop the film by one stop more than you shot it at.
2. Using a higher concentration of a fine-grain developer.
3. Use stand development to reduce contrast when pushing the film.

How do you know if a film is overexposed?

Unlike what happens in digital photography, overexposed film gets a little more saturated and you get more details on the shadows, but definitely no clipped highlights or “all-white” burnt images.

How do I get super sharp photos?

How to Take Sharp Pictures

1. Set the Right ISO.
2. Use the Hand-Holding Rule.
3. Choose Your Camera Mode Wisely.
4. Pick a Fast Enough Shutter Speed.
5. Use High ISO in Dark Environments.
6. Enable Auto ISO.
7. Hold Your Camera Steady.
8. Focus Carefully on Your Subject.

How do I get crisp film photos?

General Tips for Maximum Sharpness

1. Use the Sharpest Aperture. Camera lenses can only achieve their sharpest photos at one particular aperture.
2. Switch to Single Point Autofocus.
3. Lower Your ISO.
4. Use a Better Lens.
5. Remove Lens Filters.
6. Check Sharpness on Your LCD Screen.
7. Make Your Tripod Sturdy.
8. Use a Remote Cable Release.

Why does my film look foggy?

FOGGING. THE PROBLEM: Fogging can be caused by a number of things, including heat damage to your film, aging of film, or accidental exposure to light (like opening your camera mid-roll).

Which is better Ilford or Kodak?

In summary, if you are looking for gritty and a grainy look that’s affordable then we would recommend Ilford HP5+ 400 film. Otherwise, if price isn’t an issue, then Kodak Tri-X 400 outperforms in low light. Ilford now has a line of Single Use Cameras.

What is the difference between Ilford HP5 and XP2? HP5 is known for exhibiting longer mid-gray scale than the other two. The developers used for them all are the same and can be found easily for self developing if you are interested. XP2 on the other hand is based on color-film development requiring C-41 process; rather hard for self developing.

What’s the point of film grain?

Film grain is a recording process that intentionally adds noise to the picture. It was first used on black and white film in order to give it an artistic look. In modern times, film grain has been used as a technique for video games and movies with the same goal of adding realism.